Skip to content

CD60
motor start capacitors

Electrolytic start capacitors for switched single-phase AC motor circuits.

Duty
StartFor a switched motor-start circuit
Capacitance range
20–1500 µF
Rated voltage
110–330 VAC

The circuit must disconnect CD60 after startup. Follow the rated starting time and interval between starts.

Request a CD60 quote

Technical specifications

CD60 is an aluminium electrolytic capacitor used during motor startup. The starting circuit must disconnect it once the motor is running. Choose it by its electrical ratings and starting-duty limits, including the permitted starting time and interval between starts.

Electrical

Function
Start duty
Capacitance range
20–1500 µF
Rated voltage
110–330 VAC
Series tolerance
±10% (K), ±20% (M)
Frequency
50/60 Hz
Series temperature range
−20 to +65 °C

Case & connection

Case format
Electrolytic start-capacitor case
Series case-size range
Approximately 34 × 60 to 63 × 110 mm; use the model drawing for exact dimensions.
Construction
Aluminium electrolytic start-capacitor construction.
Connection
Blade terminals or wire leads, depending on the model.

Sample configurations & fit

CD60 · sample label ratings
Photo referenceCapacitanceRated AC voltageTolerance / frequencyVisible connectionInquiry
P038Start-capacitor sample500 µF300 VAC±5%
50/60 Hz
Blade terminalsModel details
CD60 cylindrical start capacitor with blade terminals.
P038

Motor-start sample

Visible markings
500 µF ±5% · 300 VAC
Connection / fixing
Blade terminals visible
  • Include body dimensions, terminal or lead connections and installed clearance on the drawing.
CD60 start capacitor duty cycle
Outdoor air-conditioning condensing unit.

Applications

  • Water pumps

    Pump motors with a separately switched start-capacitor circuit.

  • Air conditioners / HVAC

    Compressor motors with a separately switched start-capacitor circuit.

  • Other single-phase AC motor starting

    Switched start circuits with specified on-time and repeat-start limits.

Check start versus run duty

CD60 datasheets & drawings

Request the datasheet and drawing for your selected rating and connection. Include the destination when requesting test reports or certificates.

Current datasheet
Exact model number and revision, µF, VAC, tolerance, frequency and operating temperature.
Dimensioned drawing & revision
Body dimensions, terminal configuration and installed clearance. Starting circuit and switching arrangement.
Duty information
Maximum starting time, minimum rest interval, repeat-start limits and tolerance for the selected model.
Test reports & certificates
Model and destination coverage, issuer, certificate or report number, and validity.

Ordering & samples

Standard MOQ
5,000 pieces in total across mixed models. Confirm the quantity for each model in the quotation.
Test samples
Free test samples are available for eligible models. Confirm the sample quantity, any customisation charges, freight and preparation date before dispatch.
Production lead time
Lead time is quoted for your model, quantity, label and packing. Sample preparation and transport have separate dates; the quotation identifies which approval or payment event starts the production period.
Label & packing
Send artwork and any connection or packing requirements with the model specification.
Warranty
All models carry a warranty of at least three years. The written quotation or contract specifies the start date, coverage, exclusions and claim procedure.
Payment methods
We accept T/T bank transfers and L/C letters of credit. Agree the currency, payment schedule and any letter-of-credit conditions in the written quotation or contract.

Request a CD60 quote

Send the capacitor label or model number, quantity and delivery destination.

  • Motor model and capacitor label or specification
  • Drawing or measurements for the case, mounting and connections
  • Starting circuit, switching arrangement and duty limits
  • Quantity by rating and destination
Quotation checklist