Skip to content

Replacing a well-pump or irrigation-pump capacitor

Identify a well-pump control box capacitor from the motor and control model. Separate run and start duty and match relay, ratings and physical installation.

CBB60 cylindrical capacitor with insulated wire leads.

Use the control-box model together with the submersible motor reference. The box’s parts list and circuit identify the run capacitor, start capacitor and switching components fitted to that motor. A generic well-pump capacitor value cannot replace that model-specific information.

Identify the motor and box as a pair

A pump assembly can keep the same hydraulic section while its motor or control box changes. Photograph both identification plates and retain the box’s wiring diagram. The motor’s power rating helps find the correct documents, but it does not establish the starting capacitance or relay specification.

Franklin Electric specifies its control boxes for defined motor ranges, with different capacitor and switching arrangements across box types. That is why both references matter. For the installed well-pump system, use the documents for its own motor and control-box models. Franklin Electric: motor control boxes

Run and start capacitors have different jobs

Where a film run capacitor is fitted, it remains in the circuit during operation. Where an electrolytic start capacitor is fitted, the switching system removes it after the starting interval. A box containing both requires each original value and connection to be recorded separately.

For a start-capacitor replacement, include the maximum energized time and restart pattern. Irrigation controls that retry after a failed start can impose a different duty from evenly spaced normal starts. The capacitor and the relay have to suit that complete sequence.

Keep the replacement inside its intended environment

A capacitor used for a submersible-pump system is not automatically suitable for immersion. A component located inside a dry control box follows that enclosure’s installation conditions. Water exposure, humidity and storage requirements need explicit model documentation.

The replacement drawing needs case dimensions, fixing points and connected clearance. Preserve the specified µF, tolerance, VAC and frequency with the connection assignment. If the old label is unreadable, use the matched motor and control-box records to identify the missing rating before buying.

Identify the control-box capacitor

Send both model plates and the capacitor label, plus the control-box diagram if available.