Skip to content

Choosing the right CBB61 fan capacitor replacement

Compare CBB61 fan capacitor values, tolerance and 250 VAC versus 450 VAC ratings. Choose a replacement for the motor, with the correct connections and fit.

CBB61 rectangular capacitor with two blade terminals.

Keep the fan motor’s specified capacitance when replacing a CBB61. A 5 µF part is not a direct substitute for 4.5 µF. The replacement also needs the specified AC voltage rating, temperature category and connection arrangement, even if its rectangular case looks identical.

What changes between 4.5 µF, 5 µF and 6 µF?

The three supplied blade-terminal samples carry 4.5 µF, 5 µF and 6 µF, each at 450 VAC and ±5%. These are separate nominal values. The 4.5 µF tolerance band is 4.275–4.725 µF, while 5 µF ±5% gives 4.75–5.25 µF. The bands do not overlap. These figures are calculations from the labels, not measured inspection results.

Increasing capacitance changes the auxiliary-winding current. It is not an approved way to recover fan speed or starting torque. A slow ceiling fan or humming exhaust fan needs a diagnosis of its capacitor, supply, connections and mechanical load before a replacement value is chosen. Oriental Motor: replacement capacitor guidance

Three individual CBB61 ratings

Each housing contains a separate capacitor with the nominal value printed on its label.

250 VAC and 450 VAC describe voltage capability

The HAN XING CBB61 catalogue lists 0.5–35 µF across voltage groups spanning 250–450 VAC. A part marked 450 VAC can only replace a lower-voltage part when the motor maker’s replacement specification permits it and the remaining electrical and installation requirements match. Selecting a lower rating because the mains supply is lower ignores the voltage across the capacitor in its motor circuit.

The photographed samples show 50/60 Hz and 40/70/21. Their labels document those particular samples; they do not establish the temperature category of every rectangular polypropylene capacitor sold as CBB61. Use the datasheet for the offered model when the equipment runs near a heat source.

The fan model determines the complete replacement

CBB61 film capacitors serve selected ceiling, table, stand, ventilation and air-conditioner fan motors, as well as compatible blower or appliance motors. The equipment name alone does not select the component. Some assemblies use cylindrical capacitors; electronically controlled motors can have a different circuit entirely.

For the same electrical value, a lead-wire version and a blade-terminal version can require different assembly work. Case length, width and height, mounting tabs and the connector must all suit the fan. If the original part number is missing, the motor model and wiring diagram are more useful than matching the shell color.

Match a CBB61 to the fan model

A label photo and the fan model identify the required value. Include the case and connection dimensions for a replacement quote.