Skip to content

How to read a motor capacitor inspection report

Read capacitor test results for an identified model, sample or batch. Review capacitance, insulation, withstand tests and certificate scope.

CBB65 metal-can capacitor with its label and terminal groups visible.

A useful report identifies the tested model and sample or batch, states the method and conditions, and places measured results beside the acceptance limits. A certificate serves a different purpose: its holder, covered models, ratings and standard edition must match the purchase requirement.

Connect the record to the goods

Start with the full model reference, rating and drawing revision. A sample report applies to its identified sample; a batch report needs the batch reference, sampling plan and quantity covered. A datasheet describes a model’s specification and is not a record that the delivered lot passed inspection.

The record should identify the test date, method, instrument and calibration status. Material declarations also need to identify the covered construction or model. Together, these fields allow the buyer to trace the results to the purchased model and batch.

Read the limit beside the method

Capacitance results need the nominal value, tolerance and measurement conditions. For a dual-run part, each section needs its own result and terminal assignment. Insulation resistance, dissipation factor and dielectric-strength tests measure different properties; a good µF result cannot stand in for them.

Information needed to interpret each test
TestConditions and result to retain
CapacitanceNominal value, tolerance, test frequency, measured value and decision.
Insulation resistanceApplied DC test conditions, duration, measured result and limit.
Voltage withstand / dielectric strengthTest points, voltage, duration and specified acceptance criterion.
Dissipation factorFrequency, temperature, measured factor and model limit.

Routine inspection, type testing and endurance

Routine production inspection covers the agreed checks on the identified production scope. Type testing evaluates a defined design under a standard or test programme. Endurance testing adds specified operating conditions and duration. The report should name the tests performed and the samples or production they cover.

Agree the sampling and decision rules before the order. Near a capacitance limit, instrument uncertainty can affect acceptance. If a report has only a pass label with no test reference or scope, obtain the missing detail before using it as evidence for that purchase.

Starting-duty evidence under IEC 60252-2

IEC 60252-2 covers motor start capacitors within its scope, while IEC 60252-1 covers AC motor capacitors within its separate scope. For a CD60 proposal, the relevant report needs the offered ratings and the starting-duty conditions, including energized time and restart interval. A report for a film run model is not evidence for an electrolytic start model. IEC 60252-2: motor start capacitors

An IECEE test report form is a reporting template. It is not a completed CB test report or a certificate for the supplier’s model. A completed report needs the tested product, issuing body, results and referenced certificate where applicable. IECEE: motor start capacitor test report form

Verify certification through the issuer

Match the certificate holder, model list, ratings, standard edition and validity or status with the order. Use the issuer’s directory or verification route where available. A logo on a label and a certificate for another model do not establish coverage of the purchased configuration. UL: certification directory

Request records for the quoted model

Name the required tests, certificate scope and whether the record must cover an approval sample or the production batch.