Skip to content

How to read a motor capacitor label

Decode motor capacitor markings for µF or MFD, VAC, tolerance, 50/60 Hz and climatic category. Read actual CBB65 labels and identify missing information.

CBB65 metal-can capacitor with its label and terminal groups visible.

µF gives capacitance, VAC gives rated AC voltage, and a percentage such as ±5% gives capacitance tolerance. On motor capacitor labels, MFD is commonly used for microfarads. Frequency, climatic category and class markings describe additional conditions; the model and batch codes keep the part identifiable.

Read the electrical value before the family name

A CBB65 label showing 20 µF ±5%, 450 VAC and 50/60 Hz identifies one nominal 20 µF section at the stated AC voltage and frequencies. VAC refers to the capacitor rating, separately from the motor supply voltage. In this label context, 20 MFD also means 20 microfarads, not millifarads.

CBB60, CBB61, CBB65 and CD60 identify product families, not complete orderable specifications. Two capacitors carrying the same family designation can differ in value, duty, terminal arrangement and size. Preserve the complete label when recording a replacement.

Ratings on a CBB65 label

The label gives 20 µF ±5%, 450 VAC and 50/60 Hz.

A dual value and a tolerance tell you different things

On the supplied 50+5 µF CBB65, the two numbers identify two capacitor sections. Each belongs to its assigned circuit connection. Adding them into a single 55 µF requirement loses that distinction. A percentage alongside the capacitance is a permitted deviation from the nominal value, not an extra selectable capacitance section.

For 20 µF ±5%, the calculated band is 19–21 µF. A meter reading can be compared with that band under the applicable test conditions. The label does not report the measured value of the individual part or the accuracy of the meter used to inspect it.

Dual-run sample: 50+5 µF · 450 VAC

The label shows 50+5 µF ±5% and 450 VAC. A replacement must match both capacitance values and the terminal connections specified for the original circuit.

Keep climate, safety and batch markings separate

The CBB65 sample’s 40/85/21 marking describes a climatic category: −40 °C, +85 °C and a 21-day damp-heat test category. The following C and P1 concern operation class and an older protection designation. Those are separate classifications, with their conditions established in the model documents.

An unfamiliar final code can be a model, manufacturing or batch reference. Its meaning belongs to the manufacturer’s coding system. Do not turn an unexplained number into a date or rating. A full-label photograph preserves it for identification even when its meaning is unresolved.

When part of the label is unreadable

Use the motor or equipment model, original parts list and wiring diagram to recover the missing specification. Photos of the terminal end and mounting help identify the construction, but a matching shell cannot recover a missing µF value. A previous purchase record is useful only when it belongs to the same equipment version.

Identify an unreadable capacitor

Send the full label photo and motor model, including any visible model or batch code.