Skip to content

Wholesale motor capacitors for resale and private label

Build a resale range from actual demand. Set distinct capacitor SKUs, approve private-label packs and calculate landed cost and reorder quantities.

Hanxing CBB65 individual boxes beside a divided shipping carton.

Build your first wholesale assortment around the equipment your customers already service. Give each combination of rating, terminals and mounting its own stock code. Then use that code on your catalogue, the approved artwork and the carton label so staff can pick the same part the customer ordered.

Give each replacement a stock code your team can use

Start with repair records, customer enquiries and repeat sales. You might stock two CBB61 parts with nearly identical cases if one is 4.5 µF and the other is 5 µF. Give them separate stock keeping units (SKUs) and show the terminal end in the reseller listing. The same rating with a different fixing or lead arrangement also deserves a separate code if it changes where the part fits.

What to record for each capacitor SKU
Stock familyDetails for the catalogue and warehouse
CBB60 run capacitors for pumpsCapacitance and voltage, drawing reference, lead length and stud or clamp fixing.
CBB61 fan replacement capacitorsExact capacitance, blade or wire connection, case and mounting position.
CBB65 HVAC run capacitorsSingle or dual run, both capacitance values for a dual unit, terminal drawing and installed height.
CD60 start capacitorsModel, rated voltage, capacitance, terminal arrangement and the approved starting duty.

Buy deeper where there is repeat demand

A pump repair distributor may put most of its first order into wired CBB60 parts. A refrigeration wholesaler may need more CBB65 models, split between single and dual run. Base the quantities on open orders and customer enquiries. Keep the trial quantity small when testing a new part for a known customer or equipment project.

HAN XING’s standard minimum is 5,000 pieces across mixed models. When you send the assortment, put the required quantity next to each model and ask the factory to confirm the split. If you are comparing a second source, use the same model requirements and packing on both enquiries.

Work out landed cost by SKU

Begin with the quoted price for each item. Add charges outside the quoted delivery terms, such as inspection, freight, insurance and applicable clearance charges or duties. If the quote already includes a freight leg, record it once. Confirm destination charges with your broker and forwarder.

Suppose a shipment of 6,000 capacitors has USD 900 in additional charges outside the goods quote. If you divide those costs equally, they add USD 0.15 per piece. In a mixed shipment a metal-can capacitor may take up more carton space than a small fan capacitor. Allocate volume-based freight by carton volume when that reflects how the forwarder billed you.

Before taking a price break for a larger order, compare the cash tied up by item and the expected time to sell it. Extra units of a slow model take up budget that could cover a faster seller. The numbers above are a calculation example.

Approve the part and private-label pack together

Keep your stock code and the factory part reference next to the same drawing revision. Ask for an assembled sample of the unit pack. Check that the rating is readable, the terminals are protected and the item code on the box agrees with the capacitor inside. Put any required batch marks on the packing specification.

Prepare the approved artwork, label language and pack quantity for each model. Ask what needs new artwork or tooling before the quote is final. If your market requires a conformity mark, use it only where the documentation covers the exact part and allows that marking.

Individual boxes at the packing table

Use the final packed sample to approve how your part and label will appear when the carton is opened.

Receive the order by SKU and set a reorder point

At receipt, check quantities by stock code and keep the carton and batch references. Put aside any item with a different connector, marking or packing until you can match it to the approved sample. Record returns caused by selection errors so you can improve the next catalogue listing or pick label.

For example, a SKU that sells 120 pieces per month and takes three months to replenish needs 360 pieces to cover that interval. A buffer of 60 pieces puts the reorder point at 420. Compare that figure with what you have in stock plus confirmed incoming units, less those already promised to customers. Adjust your assumed replenishment time using actual sample approvals, production and transit.

On a repeat order, carry forward the approved part and artwork revisions. Change the quantities to reflect what sold. If the connector, drawing or box changes, approve the affected part or packaging before ordering it again.

Send your first assortment and packing brief

Share the proposed stock codes, model references and quantities. Attach the label or box artwork if you plan to sell the parts under your own brand.

  • Stock code, approved part reference and quantity for each line
  • Label language, artwork and packing requirements
  • Delivery destination and sample approval requirements